Dash Removal for Radio Access
Ensure the ignition is off and disconnect the negative battery terminal before starting. Remove trim panels around the radio using a trim removal tool to avoid damage. Gently pull out the dashboard bezel, releasing clips carefully; no force is needed due to the simple clip system.
Radio Installation Wiring Steps
Disconnect the old radio harness and connect the new radio using a vehicle-specific wiring harness adapter to avoid cutting wires. Key connections include:
- Constant 12V wire (red): Connect to battery power source.
- Switched 12V wire (yellow): Link to ignition switch for on/off control.
- Ground wire (black): Secure to chassis ground point.
- Speaker wires: Match positive and negative terminals for each channel.
- Antenna plug: Attach directly to the antenna adapter.
Reassemble the dash after testing the radio for proper functionality.
